|Frame Grabber HC-35 PCI
|CameraLink Basic Configuration|
|The Basic CameraLink configuration of the Frame Grabber HC-35 allows to connect a CameraLink camera with line locked clock frequencies of up to 85MHz.
This Grabber uses a 3,3V/5V-compatible conventional PCI Slot.
Installation for Microsoft Windows 11, 10, 8, 7 und XP --Systems is provided with the help of the HC3x-CD.
The Software contains the program HCView to get live camera displays and to save single frames and sequences.
Many predefined camera formats help to connect most of the CameraLink cameras. With the help of a dialog more cameras can be defined.
|Customer defined digital input option
|The HaSoTec Frame Grabber HC-35 can capture digital Video signals in YUV or RGB formats in a customer specific manner.
With this option HC-35 can switch between camera link and a DVI connector. The signal layout is HDMI 1.3 compatible.
Customer specific image decoders including HDCP scrambled streams are possible.
|Customer defined analog input option
|The HaSoTec Frame Grabber HC-35 can capture analog Video signals in YCrCb or RGB formats in customer specific standards. Resolutions up to 2048x1536 are possible.
||Fastest memory technology buffers camera data
HC-35 works without double buffering and uses the fastest available dual-port memory. For real-time applications
double buffering is not acceptable due to its additional delays. HC-35 allows to take the
image data immediately during the record. Data can (but must not) be analyzed without lowest possible latency.
HC-35 is the enhanced version of HC-34. HC-35 uses the newest 6ns dual-port memory technology and FPGAs for a maximum clock rate to use the CameraLink standard up to its speed limits.
This allows to use the next generation of CameraLink cameras, where the CameraLink Base configuration with a higher clock frequency is preferred instead of more parallel
data lines like defined in Medium or Full CameraLink configuration.